|Packaging Type||plastic Bottle|
STAR Nozzle Gel is Manufactured using supreme quality of materials and used for MIG Torch Gun Nozzle. With regular use, it extends the life of nozzle and contacts tips. It creates an anti – spatter film that does not clog orifices & threads. It eliminates erratic operation.
STAR Nozzle Gel helps to prevent spatter and spatter build-up. It is suitable to use on semi-automatic and automatic MIG Gun Nozzle and other welding equipments. It is well-suited for fixture and jigs and prolongs life of nozzle tip by preventing spatter build-up on tip.
Features of STAR Nozzle Gel
Ø Non-toxic and non-flammable.
Ø Non flashing,biodegradable and paintable.
Ø Silicone-free for easy application.
Ø Does not contain fluorocarbons or any ozone depleting chemical.
Ø Does not cause porosity.
Ø Eco-friendly Product.
Ø Excellent coling properties for longer tip and nozzle life.
How to apply : Dip the gun 1cm -2cm into STAR Nozzle and start welding operation. Then remover the spatter which have been stick around the contact tip and inside the nozzle.Brush onto positioner and fixtures.
Safety and handling precautions : Avoid contact with eyes as the material is slightly discomforting to the eyes. Avoid prolonged skin contact as it may cause drying of the skin. Use in a well ventilated area, however STAR NOZZLE Gel is not normally a hazard due to the non volatile nature of the product.
SPATTER NIXE is an innovative Product that has transformed the welding methods. This innovative product is silicone free ,non-flammable, non-toxic ,and non Polluting – welding Anti Spatter Liquid.
Ø Chipping Grinding not required to remove spatter.
Ø Cleaning cost is drastically reduced.
Ø Dense clean weld joint.
Ø Suitable for ISO 14000 organisation.
Ø Works wet dry.
Ø Economical in use a thin protective film is sufficient.
Ø Suitable for laser cutting.
Ø Spatter Nixe fill in spray Bottle , for Spraying application.
Ø The application surface must be free from grease oil etc.
Ø Apply Spatter Nixe in a thin uniform film on any metal surface , Apply with the help of plastic spray bottle on both the side of welding surface area – prior to welding ( Around 3-4 inches where spatter are likely to stick )
Ø After applying Spatter Nixe Start welding .
Ø Once welding gets completed use separate fresh cloth to remove welding Spatter particles along with Spatter Nixe film.
KEEP OUT OF REACH OF CHILDREN
FOR INDUSTRIAL USE ONLY.